- Home
- About
- Product
- Size
- Data
- The meaning of self-lubricating bearings
- PV Value Calculation for Bearings - Definition
- The maximum allowable PV value
- The design of the matching housing bore - straight sleeve bearing
- Matching housing bore design - flange bearing
- The design of the matching shaft
- Matching shaft surface roughness
- Matching shaft hardness
- Matching shaft surface treatment
- Mechanism design of matching shafts
- Factors that affect the life of the bearing
- The formula for calculating the press-in force F during assembly
- Straight sleeve assembly method
- Flanging assembly method
- Thrust gasket, plate assembly method
- Inspection method for the outer diameter of the rolled bearing
- Inspection method for the inner diameter of the rolled bearing
- Test method for thrust sheets
- Surface roughness comparison table
- Plain bearing technical parameters consultation form
- Application
filter select all | reset
Type
Date Range
No result found.
Structural characteristics
PJ bimetallic composite bearings are based on high-quality low-carbon steel, and the surface is sintered with copper alloys with low friction characteristics (CuPb10Sn10, CuPb6Sn6Zn3, CuPb24Sn4, CuPb30, AlSn20Cu, CuSn8Ni) as the wear-resistant layer of the bearing. The material can obtain good bonding strength and optimal bearing capacity through secondary sintering and secondary extrusion.
PJ bimetal internal hole machining and non-machinable thickness tolerances
Product Applications
Construction machinery: chassis walking mechanism roller bushing, towing pulley axle sleeve, tensioner shaft sleeve; Automotive industry: balance shaft bushings, steel pin bushings, steering knuckle main bushings, connecting rod bushings, valve rocker arm bushings, camshaft bushings, differential bushings, transmission bushings, internal combustion engine spindle bearings, thrust washers; As well as piston pump side plates, gear pump side plates, etc.
The form of oil groove and oil hole of bimetallic self-lubricating bearing
Buckle form of bimetallic bearings
Product sub-categories
